DoorKing 9500 Industrial Slide Gate Opener Series

DoorKing

$10,508.00 
SKU: doorking-9500

CLICK HERE FOR MANUAL 9500

9500 Industrial Slide Gate Opener Series

The DKS 9500 Slide Gate Operator series operators are designed to operate extremely heavy vehicular slide gates in limited (Class III) and restricted (Class IV) applications.   This slide gate operator is not to be used in any residential settings.  It is only means to be used in limited (Class III) and restricted (Class IV) locations only. The Doorking 9500 series uses a high tensile steel alloy roller chain as the pulling medium, which is immune to slippage and un-even terrain it also simplifies installation. The DKS 9500 Slide Gate Opener include a speed control module that allows the user to set the speed of the gate, and it also has a slow-start and slow-stop function.  There are four different options of the operator that you can choose when you add to cart.  If you have any questions please call 1-800-676-4909.  

DoorKing 9500 Series Models:

9530 - 3 HP, 10,000 Lbs., 2 ft/sec, #80 chain.     CLICK HERE FOR BROCHURE 9530
9550 - 5 HP, 15,000 Lbs., 1 ft/sec, #100 chain.    CLICK HERE FOR BROCHURE 9550
9555 - 5 HP, 10,000 Lbs., 2 ft/sec, #80 chain.     CLICK HERE FOR BROCHURE 9555
9575 - 7.5 HP, 25,000 Lbs., 2 ft/sec, #100 chain.CLICK HERE FOR BROCHURE 9575


Features:

Speed control module
Slow start / slow stop
Direct driven limit nuts
Anti-tailgating feature
Adjustable partial open
Gate tracker reporting output
Built-in diagnostics
Ports for plug-in loop detectors
Selectable stop / reverse loop functions
Two 115 VAC convenience outlets
Fail-secure operation includes crank for manual operation
Programming switches
Built-in 3-button control (open-close-stop)
Built-in power On/Off switch.

Specs: 

-Maximum gate length 160-feet.
-HP, maximum gate weight*, speed and chain size: 
-9530 - 3 HP, 10,000 Lbs., 2 ft/sec, #80 chain.
-9550 - 5 HP, 15,000 Lbs., 1 ft/sec, #100 chain.
-9555 - 5 HP, 10,000 Lbs., 2 ft/sec, #80 chain.
-9575 - 7.5 HP, 25,000 Lbs., 2 ft/sec, #100 chain. 
-(*Assumes gate is on level ground, in good condition with properly adjusted hardware. -- -Other external factors may affect the performance of the gate operator.)
-10:1 or 40:1 gear reduction running in a continuous oil bath (dependant on model).
-Electronic braking - all models.
-Self adjusting disc brake with manual release (9555 only).
-208, 230, 460 VAC three-phase.
-Operator is shipped with chain brackets and 20-feet of #80 or #100 chain (dependant on   model).
-Class III and IV applications only.
-ETL Listed.  (Note: To be compliant with UL 325 and industry safety guidelines,    additional Type B1 and/or Type B2 entrapment prevention devices are required to  be installed with this gate operator.  Your professional DKS system installer can  provide you with more details on these devices and on current industry safety  standards.)
-Dimensions: 54 "W x 59 "H x 26 "D


Options:

Plug-in loop detectors.
Gate Tracker reporting (DKS 1833, 1835, 1837 or 1838 access controllers only).
Chain tray (recommended on gates exceeding 20-ft in length).
Non-contact and/or contact sensing devices.
Stop - Go traffic signal.
Heater kit for cold environments.
Surge suppressors.

Our brands