***Once the order for this operator is placed it cannot be cancelled***
HySecurity SlideDriver 30F UPS
Cycle up to 3,000 lb gates of any length at 1.7 ft per second!
The Uninterruptible DC Power Supply provides up to 3,000 ft (914 m) of gate travel after AC power loss.* Almost twice the speed of traditional slide gate operators. SlideDriver 30F’s soft-start system (key to smoothly moving slide gates faster than 1 ft/s) combined with a high flow rate pump, cycles heavy, up to 3,000 lb gates, at just 1.7 ft/s (1,361 kg / 50 cm/s). Available in single phase only: Low voltage: 115V 60/50Hz (requires 30A branch circuit) or High voltage: 208-230V 60/50Hz (requires 15A branch circuit). Be certain to order the correct HyCharger DC™ voltage model as chargers are not field convertible.
This is an industrial gate opener with many options. Please read through the spec sheet and manual before ordering. We will fill the order per your specs. Once ordered it cannot be changed, returned or refund as it is built to order.
||1.7 ft/s (50 cm/s)
||Limited only by weight
||up to 3,000 lb (1,361 kg)
||300 lb (136 kg)
||DC Power Supply w/HyCharger DC™ provides up to 3,000 ft (914 m) of gate travel after AC power loss.*
|Single Phase Voltages
||115V 60/50Hz, 23A** or 208-230V 60/50Hz, 11.5A
|Three Phase Voltages
||-40º to 158º F (-40º to 70º C) No heater necessary
||RS-232, RS-485; Ethernet/fiber using optional HyNet™ Gateway accessory
||Smart Touch Controller with 70+ configurable settings. Smart Touch keypad and 32 character, OLED display or a PC using S.T.A.R.T. software.
||Three configurable user relays: one 30VDC, 3A solid state and two 250VAC, 10A electromechanical; Optional Hy8Relay™ for 8 additional relay outputs
||Usage Class III, IV
||DC Power Supply: Type 3R, 30w x 30h x 12d inch (76w x 76h x 30.5d cm)
||Zinc plated with powder coating
||*The operator’s normal duty cycle and the actual number of gate cycles available from battery depends upon gate resistance to travel, cycle length, battery size, state of charge, and health, ambient temperature, accessory power draw and frequency of gate cycles during power outage.
||**115V requires a 30A branch circuit. Choose voltage with care as chargers are not field convertible.