Liftmaster MAT Mega Arm Tower Barrier Arm opener (Arm NOT included)

The MATDCBB3 is a Commercial duty barrier gate operator with a 24VDC motor, and a built in battery back up system.  This operator can run up to 6000 cycles a day at a speed of 2.5 seconds per open and close. If the power is lost than the battery back up system will be able to power the operator until the power is restored. There is a 2 year warranty on electronics and mechanisms, and a 10 year warranty for chassis and cover. Arm lengths are available in 12 and 15 ft. If you have any questions give is a call at 800-676-4909 

Features and Specs

• MOTOR 24VDC - 1/2 HP equivalent
• OPERATOR DUTY RATING Continuous duty
• CHASSIS/FRAME Powder coated 1/4 in. aluminum alloy
• GEAR REDUCTION 60:1 worm gear reducer in synthetic oil bath
• ARMS 12’, 17’ LED arms; 12’, 14’, 17’ aluminum round arms; 12’, 14’ aluminum arm with yellow padding
• COVER MA – UV-resistant polyethylene; MAT – full aluminum cabinet
• RECOMMENDED CAPACITIES 12 ft. & 15 ft. aluminum arm and 14 ft. soft padded arm recommended, 6,000 cycles per day
• BATTERY BACKUP Yes
• REMOTE CONTROL ACCESS Security+ 2.0® 3-channel receiver will handle up to 90 remote controls
• (unlimited remotes with 811LMX/813LMX)
• FIRE DEPARTMENT COMPLIANT Allows gate to auto open upon loss of AC power or battery depletion
• LIMIT SETTING Magnetic
• OPERATOR SPEED Opening time: 2.5 seconds
• POWER 120V/230VAC single phase
• ACCESSORY POWER 24VDC, 500mA
• OPERATOR WEIGHT MADCBB3 – 89 lbs.; MATDCBB3 – 113 lbs.
• WARRANTY 2 years; 10 years frame and cover
• TEMPERATURE SPECIFICATIONS Without heater: -4°F (-20°C) to 140°F (60°C); with optional heater: -40°F (-40°C) to 140°F (60°C)
• UL USAGE CLASSIFICATION UL 325 & UL 991 listed – class I, II, III and IV