Diablo DSP-13P-100 Tri-Axis Detection with detector and 100 foot sensor

Diablo DSP-13P package with 100ft lead wire
Diablo detector
Diablo DSP-13P lead wire
Diablo DSP-13P-100 Tri-Axis Detection with detector and 100 foot sensor

Diablo DSP-13P-100 Tri-Axis Detection with detector and 100 foot sensor

  • Nationwide shipping
  • Freight | UPS | USpS
  • Secure payments
Regular price $419.99
/
Shipping calculated at checkout.

CLICK HERE FOR MANUAL

The DSP-13 Tri-Axis Detection (TRIADTM)

System is designed to be an accurate, reliable, and easy to install detection system. The system is comprised of two parts, a master unit (DSP-13M) and a sensor (DSP-13S).

The DSP-13M (Master) is installed in the control box. It requires a 10 pin connection. Up to two sensors can be connected to a single master. The advanced sensor’s small size and high sensitivity make it ideally suited to vehicle detection applications. The detection area of the DSP-13 ranges from a 3' x 3' to 15' x 15'; based upon the Sensitivity setting on the front panel.The TRIAD system can be installed using a single saw cut. The sensor is potted in epoxy to provide durability and small enough that it can be placed right in the saw cut.

Using a three axis sensor eliminates any concerns about the orientation of the sensor during installation.The TRIAD system is capable of holding vehicle detection for an indefinite period of time. It can even remember vehicle detection through power outages.

Even if a vehicle parks in the detection zone while power is removed, when power is restored the detector will sense that there is now a vehicle in the detection zone. This gives you an extra level of safety not available with other detection systems.

CLICK HERE FOR MANUAL

The DSP-13 Tri-Axis Detection (TRIADTM)

System is designed to be an accurate, reliable, and easy to install detection system. The system is comprised of two parts, a master unit (DSP-13M) and a sensor (DSP-13S).

The DSP-13M (Master) is installed in the control box. It requires a 10 pin connection. Up to two sensors can be connected to a single master. The advanced sensor’s small size and high sensitivity make it ideally suited to vehicle detection applications. The detection area of the DSP-13 ranges from a 3' x 3' to 15' x 15'; based upon the Sensitivity setting on the front panel.The TRIAD system can be installed using a single saw cut. The sensor is potted in epoxy to provide durability and small enough that it can be placed right in the saw cut.

Using a three axis sensor eliminates any concerns about the orientation of the sensor during installation.The TRIAD system is capable of holding vehicle detection for an indefinite period of time. It can even remember vehicle detection through power outages.

Even if a vehicle parks in the detection zone while power is removed, when power is restored the detector will sense that there is now a vehicle in the detection zone. This gives you an extra level of safety not available with other detection systems.

Recently viewed
See more products from Diablo Controls
Diablo DSP-40S plug in loop detector. Picture by PSS Store
Diablo DSP-40S Plug-in Loop Detector
Diablo DSP-40S Plug-in Loop Detector
Diablo
$93.99
Diablo DML-9LP-75 Probe Kit including 75 foot probe and detector
Diablo
$197.99
Diablo DML-9LP Probe Detector
Diablo DML-9LP Probe Detector
Diablo
$98.99
Diablo DSP-7
Diablo DSP-7 10-30 VAC/DC Loop Detector (Fail Safe)
Diablo DSP-7 10-30 VAC/DC Loop Detector (Fail Safe)
Diablo
$98.99
Sold Out
Diablo DSP-13P-75 Tri-Axis Detection with detector and 75 foot sensor
Diablo DSP-13P detector
Diablo DSP-13P-75 Tri-Axis Detection with detector and 75 foot sensor
Diablo
$356.99
Diablo DSP-7LP. picture by pss store
Diablo DSP-7LP 10-30 VAC/DC Low Power Loop Detector (Fail Safe)
Diablo
$98.99
pssstore.net widget logo